Getting started with the collection:
Model of an Anchor
Grofsmederij Leiden, Rijkswerf Amsterdam, c. 1869
Model van een 'plattehands-'anker. De armen en handen zijn in hetzelfde vlak gezet als de schacht en de ankerstok, maar kunnen draaien in een gat in de schacht. De ankerstok is plat en V-vormig gebogen met de punten naar achteren, en is met een spie geborgd. De schacht heeft een harp aan het boveneind en een bij het kruis. Schaal 1:10 (schatting).
- Artwork typeinstruction model
- Object numberNG-MC-1416
- Dimensionstotal: length 27 cm, anchor stock: width 12.4 cm, span 12 cm
- Physical characteristicsbrass
Identification
Title(s)
Model of an Anchor
Object type
Object number
NG-MC-1416
Description
Model van een 'plattehands-'anker. De armen en handen zijn in hetzelfde vlak gezet als de schacht en de ankerstok, maar kunnen draaien in een gat in de schacht. De ankerstok is plat en V-vormig gebogen met de punten naar achteren, en is met een spie geborgd. De schacht heeft een harp aan het boveneind en een bij het kruis. Schaal 1:10 (schatting).
Part of catalogue
Creation
Creation
- model maker: Grofsmederij Leiden, Leiden
- model maker: Rijkswerf Amsterdam, Amsterdam
- after design by F. Martin, Marseille
Dating
- c. 1869
- 1880
Search further with
Material and technique
Physical description
brass
Dimensions
- total: length 27 cm
- anchor stock: width 12.4 cm
- span 12 cm
Explanatory note
De gegevens omtrent de vervaardiging van het model zijn tegenstrijdig. In 1869 bestond er een model, dat door de Grofsmederij Leiden werd gebruikt bij de fabricage van een aantal ankers. Volgens de toenmalige opzichter van de modellenkamer J.J. Backer Dirks echter, werd het model op de Rijkswerf te Amsterdam vervaardigd in 1880; de archiefstukken waarnaar hij verwijst zijn echter niet achterhaald. Hoewel de tien ankers die de Grofsmederij Leiden in 1869 naar dit ontwerp leverde wat gewicht betreft nogal afweken van de specificaties, werd de minister toch geadviseerd ze te accepteren. Ze werden naar de Rijkswerf te Amsterdam overgebracht.
This work is about
Subject
Acquisition and rights
Copyright
Provenance
...; transferred from the Ministerie van Marine (Department of the Navy), The Hague, to the museum, 1883
Persistent URL
To refer to this object, please use the following persistent URL:
Questions?
Do you spot a mistake? Or do you have information about the object? Let us know!
Grofsmederij Leiden, Rijkswerf Amsterdam
Model of an Anchor
Leiden, Amsterdam, Marseille, 1880
Provenance
...; transferred from the Ministerie van Marine (Department of the Navy), The Hague, to the museum, 1883
Object number: NG-MC-1416
Entry
Model of a ‘flat hand’ anchor.
The arms and flukes are set in the same plane as the anchor stock, but can turn in a hole in the shank. The anchor stock is flat and bent into a V-shape, the ends pointing backwards, and is secured with a wedge. The shank has a shackle at the end and one at the crown.
The evidence concerning the manufacture of this model is contradictory: in 1869 a model existed and was used as a pattern by the Grofsmederij Leiden to produce a number of anchors; however, according to J.J. Backer Dircks, Director of the Navy Model Room at that time, the model was manufactured at the Navy dockyard in Amsterdam in 1880. The archival sources from 1880 he refers to could not be found.
Although the ten anchors manufactured for the Navy by the Grofsmederij Leiden in 1869 had some important errors in their weight, the minister was advised to accept them and they were sent to the Navy dockyard in Amsterdam.
Scale (estimate) 1:10.
Literature
J.M. Obreen et al., handwritten inventory list for items 944 to 1431, 1884, manuscript in HNA 476 RMA, inv. no. 1089, no. 1416
Citation
J. van der Vliet, 2016, 'Grofsmederij Leiden or Rijkswerf Amsterdam, Model of an Anchor, Leiden or Amsterdam, c. 1869', in J. van der Vliet and A. Lemmers (eds.), Navy Models in the Rijksmuseum, online coll. cat. Amsterdam: https://data.rijksmuseum.nl/20054269
(accessed 24 mei 2026 01:33:10 UTC+0).